Devicename - Ricoh Aficio MP W3600 Network Manual

Monitoring and Configuring the Printer
❖ Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname | location}
• cname
Reset the computer name. The default computer name will be displayed
when the computer is restarted.
• location
2
Reset the location information. The previous location information will be deleted.
❖ Interface configuration
msh> bonjour linklocal "interface_name"
• If many types of interface are installed, configure the interface that com-
municates with linklocal address.
• If you do not specify an interface, the Ethernet interface is automatically selected.
• wlan can be specified only when the IEEE 802.11b interface is installed.
Interface
ether
wlan
❖ Setting IPP-SSL Printing
msh> bonjour ippport {ipp | ssl}
• If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and
IPP-SSL printing can be performed with higher security.
• If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631.
Port 631 is the port for normal IPP printing.

devicename

Use the "devicename" command to display and change the printer name.
❖ View settings
msh> devicename
❖ Printer name configuration
msh> devicename name "string"
• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.
❖ Printer name initialization
msh> devicename clear name
• Reset the printer name to its default.
66
Interface configured
Ethernet interface
IEEE 802.11b interface