Setting A Password - Ricoh Aficio MP W3600 Network Manual

Monitoring and Configuring the Printer

Setting a Password

Follow the procedure below to set a password.
A
Start SmartDeviceMonitor for Admin.
B
On the [Group:] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
2
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C
In the list, select a machine whose configuration you want to change.
D
On the [Tools] menu, click [NIB Setup Tool].
NIB Setup Tool starts when the network interface board is default. Click [Web
browser], and then click [OK].
E
A Web browser opens and enter the login user name and password, and then
click [Login].
For details about the user name and password, consult your network admin-
istrator.
F
Click [Configuration].
G
Click [Program/Change Administrator] on the [Device Settings] area, and then
change the settings.
H
Quit Web Image Monitor.
I
Quit SmartDeviceMonitor for Admin.
Note
❒ For details about the login user name and password, see Security Reference.
48