Installing Smartdevicemonitor For Admin - Ricoh Aficio MP W3600 Network Manual

Monitoring and Configuring the Printer

Installing SmartDeviceMonitor for Admin

Follow the procedure below to install SmartDeviceMonitor for Admin
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
2
The installer starts.
C
Select an interface language, and then click [OK].
The following languages are available: Czech, Danish, German, English,
Spanish, French, Italian, Hungarian, Dutch, Norwegian, Polish, Portuguese ,
Finnish, Swedish, Chinese Simple and Chinese Traditional.
D
Click [SmartDeviceMonitor for Admin].
E
Click [Next >].
The software license agreement appears in the [License Agreement] dialog box.
F
After reading through its contents, click [Next >].
G
Follow the instructions on the screen.
A message appears when the installation is completed.
H
Click [OK].
A message about restarting the computer may appear. Restart the computer
to complete installation.
Note
❒ Auto Run may not work under certain operating system settings. In this
case, launch "Setup.exe" located on the CD-ROM root directory.
❒ If you are required to restart the computer after installing SmartDevice-
Monitor for Admin, restart the computer and continue the configuration.
40