Checking The Machine Status - Ricoh Aficio MP W3600 Network Manual

Checking the Machine Status

Follow the procedure below to check machine status.
A
Start SmartDeviceMonitor for Admin.
B
On the [Group:] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C
To obtain status details, select the machine in the list, and then click [Open]
on the [Device] menu.
The machine status appears in the dialog box.
D
Click [System] or [Printer].
The machine status appears in the dialog box.
E
Quit SmartDeviceMonitor for Admin.
Note
❒ For details about items in the dialog box, see SmartDeviceMonitor for Admin
Help.
Using SmartDeviceMonitor for Admin
2
49