Setting Up The Machine On A Network; Initial Settings Overview - Ricoh Aficio MP W3600 Network Manual

Setting Up the Machine on a Network

This section describes the network settings you can change with User Tools (Sys-
tem Settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
❒ These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.

Initial Settings Overview

❖ Interface Settings
Machine IPv4 Address
IPv4 Gateway Address
Machine IPv6 Address
IPv6 Gateway Address
IPv6 Stateless Address Autoconfiguration
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
NCP Delivery Protocol
NW Frame Type
LAN Type
Ethernet Speed
Ping Command
SMB Computer Name
SMB Work Group
Permit SNMPv3 Communication
2
Menu Description
Specifies the machine IPv4 address and sub-
net mask in the network environment.
Configure the gateway address for the router
or host computer used as a gateway.
Specifies the machine IPv6 address and sub-
net mask in the network environment.
Configure the gateway address for the router
or host computer used as a gateway.
Specifies the automatic configuration of the
IPv6 Stateless Address.
Make settings for the DNS server.
Specifies the DDNS settings.
Specifies the domain name.
Specifies the WINS server settings.
Select the protocol to use in the network.
Select the protocol for NCP delivery:
Select the frame type when you use Net-
Ware.
Select interface, IEEE 802.11b (wireless LAN)
or Ethernet when you have installed the op-
tional IEEE 802.11b interface unit.
Set the access speed for networks.
Check the network connection with ping
command using given IP address.
Specifies the SMB computer name.
Specifies the SMB work group.
Set the encrypted communication of SNMP
v3.