Ssh; Status - Ricoh Aficio MP W3600 Network Manual

Monitoring and Configuring the Printer

ssh

Use the "ssh" command to view and configure SSH settings.
❖ View settings
msh> ssh
2
❖ Data compression communication settings
msh> ssh compression {on|off}
The default is "on".
❖ SSH/SFTP communication port setting
msh> ssh port {22, 1024–65535}
The default is 22.
❖ SSH/SFTP communication timeout setting
msh> ssh timeout {0–65535}
The default is 300.
❖ SSH/SFTP communication login timeout setting
msh> ssh logintimeout {0–65535}
The default is 300.
❖ Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|1024} "character string"
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
❖ Deleting open key for ssh/sftp communication
msh> ssh delkey
Note
❒ If you do not specify a character string, current setting is displayed.

status

Use the "status" command to display the printer status.
❖ view messages
msh> status
Reference
p.94 "Current Printer Status"
86