Using Netware - Ricoh Aficio MP W3600 Network Manual

Using NetWare

This section describes the setting procedure for network printers in the NetWare
environment. In the NetWare environment, you can connect the machine as a
"print server" or "remote printer".
Important
❒ IPv6 cannot be used on this function.
❖ Setting procedure
When using the machine as a print server
A
Installing SmartDeviceMonitor for Admin
B Setting the network interface board.
C
Turning the machine off and then back on.
When using the machine as a remote printer
A Installing SmartDeviceMonitor for Admin.
B
Setting the network interface board.
C Setting NetWare.
D Starting the print server.
Note
❒ This procedure assumes an environment is already prepared for normal Net-
Ware running the printing service setting.
❒ The procedure is explained with the following example settings:
• File server's name ...CAREE
• Print server's name ...PSERV
• Printer's name ...R-PRN
• Queue name ...R-QUEUE
❖ Using SmartDeviceMonitor for Admin
To use the machine in a NetWare environment, use SmartDeviceMonitor for
Admin to set the NetWare printing environment.
❖ Printers listed by SmartDeviceMonitor for Admin
SmartDeviceMonitor for Admin lists printers connected to the network. If
you cannot identify the machine you want to configure, print configuration
page, and then check the machine name.
Note
❒ The NetWare Client provided by Novell is required to set the printing envi-
ronment using SmartDeviceMonitor for Admin under the following environ-
ments:
• NDS mode in Windows 95/98/Me
• NDS or Bindery mode in Windows 2000/XP, Windows NT 4.0
Reference
p.40 "Installing SmartDeviceMonitor for Admin"
Using NetWare
1
17