Printing Commands - Ricoh Aficio MP W3600 Network Manual

Special Operations under Windows

Printing Commands

The following explains printing operations using the "lpr", "rcp", and "ftp"
commands.
Enter commands using the command prompt window. The location of the com-
mand prompts varies depending on operating systems:
• Windows 95/98
[Start] - [Programs] - [MS-DOS Prompt]
• Windows Me
3
[Start] - [Programs] - [Accessories] - [MS-DOS Prompt]
• Windows 2000
[Start] - [Programs] - [Accessories] - [Command Prompt]
• Windows XP, Windows Server 2003
[Start] - [All Programs] - [Accessories] - [Command Prompt]
• Windows NT 4.0
[Start] - [Programs] - [Command Prompt]
Note
❒ Match the data format of the file to be printed with the emulation mode of the
printer.
❒ If the message "print requests full" appears, no print jobs can be accepted. Try
again when sessions end. For each command, the amount of possible sessions
is indicated as follows:
• lpr: 5 (When the spool printing function is available: 10)
• rcp, rsh: 5
• ftp: 3
❒ Enter the file name in a format including the path from the directory execut-
ing commands.
❒ The "option" specified in a command is an intrinsic printer option and its syn-
tax is similar to printing from UNIX. For details, see UNIX Supplement.
lpr
❖ When specifying a printer by IP address
c:> lpr -Sprinter's IP address [-Poption] [-ol] \pass name\file name
❖ When using a host name instead of an IP address
c:> lpr -Sprinter's host name [-Poption] [-ol] \pass name\file name
When printing a binary file, add the "-ol" option (lowercase O, and lowercase L).
When using a printer with the host name "host" to print a PostScript file named
"file 1" located in the "C:\PRINT" directory, the command line is as follows:
c:> lpr -Shost -Pfiletype=RPS -ol C:\PRINT\file1
116