Settings - Denon AVR-890 Owner's Manual

Making the video settings (Video)
The items that can be set depend on the input source and the "Input Assign" setting.
Setting items
Video Select Source : Play the picture and sound of the input source.
Switch video input source DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
while listening to audio source to view. This can be set for individual input sources.
signal.
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which "Delete" is selected at "Source Delete" (vpage
32) cannot be selected.
• Input sources for which "None" is selected at "Input Assign" (vpage
35) cannot be selected.
•
This can also be set by pressing
• To cancel, press
Video Convert
This can be set when the input source is DVD
The input video signal is
VCR DVR
converted automatically in
ON : The input video signal is converted.
function of the connected
OFF : The input video signal is not converted.
TV (vpage 9 "Converting
Input Video Signals for
Output (Video Conversion
• When a non-standard video signal from a game machine or some other
Function)").
source is input, the video conversion function might not operate. In this
case set "Video Convert" to "OFF" .
• When "Video Convert" is set to "OFF" , the video conversion function
does not work. In this case, connect the AVR-890 and TV with the same
type of cable.
i/p Scaler
This can be set to the DVD
The input source's resolution
input sources.
is converted to the resolution
OFF : Do not use i/p scaler function.
set at "Resolution" .
Analog : Analog signals are converted to HDMI signals.
Analog and HDMI : Both analog signals and HDMI signals are converted
to the desired HDMI resolution.
Resolution
This can be set when the input source is set to DVD
Set the output resolution.
SAT/CBL VCR
Resolution A (Analog) : Analog
other than "OFF".
Video
AUTO : Detect monitor panel resolution and automatically set output
Resolution H (HDMI) : HDMI
resolution.
480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Select the output
resolution.
Remote control
operation buttons
Default settings are underlined.
Setting contents
.
to select "Source" .
HDP TV
V.AUX .
HDP TV SAT/CBL VCR DVR
DVR V.AUX , and when "i/p Scaler" is set to anything
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Setting items
Progressive Mode
Select optimum progressive
mode for video material.
Aspect
Set the aspect ratio of the
video signal output from the
HDMI terminal.
SAT/CBL
V.AUX
HDP TV
Making the input settings (Input Setup)
Setting contents
This can be set when the input source is set to DVD
SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything
other than "OFF" .
AUTO : The video material is automatically detected and the appropriate
mode is set.
Video1 : Select mode suitable for video playback.
Video2 : Select mode suitable for video and 30-frame film material
playback.
This can be set when the input source is set to DVD
SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything
other than "OFF" .
Normal : Output at 4:3 aspect ratio.
Full : Output at 16:9 aspect ratio.
: Decision the setting : Return to previous menu
ENGLISH
HDP TV
HDP TV