Making other settings (Option Setup)
Setting items
Volume Control
Volume Display : Set the volume display method.
Set the MAIN ZONE volume
•
Relative : The volume is displayed within the range of – – –dB (Minimum),
setting.
–80.5 dB ~ +18 dB.
•
Absolute : The volume is displayed within the range of 0, 1 ~ 99.
Vol.Limit : Make a setting for maximum volume.
•
OFF : Do not set a maximum volume.
•
–20dB(61) / –10dB(71) / 0dB(81)
Power On Level : This sets the volume set when the MAIN ZONE's power
is turned on.
•
Last : Use the memorized setting from the last session.
•
– – – : Always use the muting on condition when power is turned on.
•
–80dB(1) ~ +18dB(99) : The volume is adjusted to the set level.
Mute Level : This sets the amount of attenuation of the volume when the
mute mode is set in the MAIN ZONE.
•
Full : The sound is cut off entirely.
•
–40dB : The sound is attenuated by 40 dB.
•
–20dB : The sound is attenuated by 20 dB.
Source Delete
TUNER / PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR /
Remove
input
sources
V.AUX / SIRIUS : Select the sources you do not want to use.
that are not used from the
•
ON : Use this source.
display.
•
Delete : Do not use this source.
NOTE
• The currently selected input source cannot be set.
• Input sources set to "Delete" cannot be selected using
GUI
Screensaver : Make screensaver settings.
Make the settings related to
•
ON : The screen switches to the screensaver if no operation is performed
displays on the TV screen.
for approximately 3 minutes while a menu is displayed or while an iPod
screen is displayed. When you press
cancelled and the screen before that screen saver started is displayed.
•
OFF : Turn the screensaver function off.
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
•
Picture : Set the background to a picture (DENON logo).
•
Black : Set the background to black.
Remote control
operation buttons
Default settings are underlined.
Setting contents
uio p
, the screen saver is
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Setting items
GUI
Format : Set the video signal format to be output for the TV you are
Make the settings related to
using.
displays on the TV screen.
•
•
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text
surround mode, input mode, etc., is performed.
•
•
Master Volume
•
•
•
Tuner Information
tuner operation is performed.
•
•
•
.
•
iPod Information
iPod operation is performed.
•
•
•
•
Making detailed settings (Manual Setup)
Setting contents
NTSC : Select NTSC output.
PAL : Select PAL output.
The "Format" can also be set by the following procedure. However,
the GUI screen is not displayed.
1. Press and hold
o
on the main unit and
"Video Format" appears on the display.
2. Press
o p
and set the video signal format.
3. Press
,
or
to complete the setting.
NOTE
:
The mode name is displayed when the operation for switching the
ON : Turn display on.
OFF : Turn display off.
:
Master volume display during adjustment.
Bottom : Displayed at the bottom of the screen.
Top : Displayed at the top of the screen.
OFF : Turn display off.
:
This sets the time the GUI menu is displayed when a
Always : Show display continuously.
30sec : Show display for 30 seconds after operation.
10sec : Show display for 10 seconds after operation.
OFF : Turn display off.
:
This sets the time the GUI menu is displayed when an
Always : Show display continuously.
30sec : Show display for 30 seconds after operation.
10sec : Show display for 10 seconds after operation.
OFF : Turn display off.
: Decision the setting
: Return to previous menu
ENGLISH
for at least 3 seconds.
See overleaf
2