Denon AVR-890 Owner's Manual page 69

GAudioH
Symptom Cause
No sound is • You are playing a monaural source
produced from (TV, etc.) in the "STANDARD"
center speaker. (Dolby/DTS Surround) mode.
No sound • The surround mode is set to
is produced "STEREO" , "DIRECT" or "PURE
from surround DIRECT" .
speakers.
No sound is • The surround back speaker's
produced from power amplifier is assigned to a
surround back different channel.
speaker. • "S.Back" setting is
"None" .
• The "Audio/Video
– "Audio Adjust" – "Surround
Back" settings are "OFF" .
• Surround mode not set to a mode
for 6.1- or 7 .1-channel playback.
No sound is • Subwoofer's power not turned
produced from on.
subwoofer. • The "Subwoofer" setting at
"Speaker Config. " is set to "No" .
• The subwoofer is not properly
connected.
• The subwoofer's volume
turned off.
DTS sound is not • Blu-ray Disc player / DVD player's
output. audio output setting is not set to
bitstream.
• Blu-ray Disc player / DVD player is
not compatible with DTS sound
playback.
• The AVR-890's "Decode Mode"
setting is set to "PCM" .
HDMI audio • The "Manual Setup" – "HDMI
signals are not Setup" – "HDMI Audio Out"
output from setting is set to "TV" .
speakers.
No sound is • The "Manual Setup" – "HDMI
output from Setup" – "HDMI Audio Out"
the monitor setting is set to "Amp" .
connected
with HDMI
connections.
Countermeasure
• The mode is set to something
other than "STANDARD" (Dolby/
DTS Surround).
• Set to a surround playback
mode.
• Check the setting and change it
as necessary.
set to • Set to something other than
"None" .
Adjust" • Please set "Audio/Video Adjust"
– "Audio Adjust" – "Surround
Back" to settings other than
"OFF" .
• Select a surround playback
mode.
• Turn on the subwoofer's power.
• Set to "Yes" .
• Check the connections.
is • Adjust the subwoofer's volume
to an appropriate level.
• Set the Blu-ray Disc player / DVD
player. For details, refer to the
Blu-ray Disc player / DVD player's
operating instructions.
• Use a DTS-compatible player.
• Set to the "Auto" or "DTS"
mode.
• Set to "Amp" .
• Set to "TV" .
Symptom
Page Dolby TrueHD, • HDMI is not connected.
DTS-HD, Dolby • Blu-ray Disc player's audio output
44
Digital Plus audio setting is not set to bitstream.
is not output.
• Blu-ray
45, 46
compatible with DTS sound
playback.
GVideoH
27
Symptom
No picture • The connections between the
28
appears. AVR-890 and monitor are faulty.
• The monitor's input setting is
47
wrong.
• PURE DIRECT mode is set.
• The player is connected using
the component input connectors,
44
the monitor
using the video (yellow) output
–
connectors.
27
Picture cannot be • Input source does not match
recorded. recorder's
11
connector (video).
53
DVDs cannot be
–
copied on a DVR.
The menu screen
–
and status
indicators are not
displayed.
37
30
• "OFF" is displayed for the
status.
• The main volume display is
30
"OFF" .
• The display during tuner operation
is "OFF" .
• The display during iPod operation
is "OFF" .
Cause Countermeasure
• Connect the HDMI.
• Set the Blu-ray Disc player. For
details, refer to the Blu-ray Disc
player's operating instructions.
Disc player is not • Use a DTS-compatible player.
Cause Countermeasure
• Check the connections.
• Set properly.
• Cancel the PURE DIRECT mode.
• High definition (1080i/720p) and
is connected progressive (480p/576p) video
signals are not down-converted.
Set the player
(480i/576i) signals.
• The video conversion function
video connection does not work for the REC
OUT connectors. Match the
input source and
connections.
• This is not a malfunction. Most
movie software includes copy
–
prevention signals and cannot be
copied.
• When viewing
component video signals via the
AVR-890, the GUI menu appears
MENU
when the
MENU
main unit or the
the remote control unit.
• Set "Manual Setup" – "Option
Setup" – "GUI" – "Text" to
"ON" .
• Set "Manual Setup" – "Option
Setup" – "GUI" – "Master
Volume" to "Top" or "Bottom" .
• Set when "Manual Setup" –
"GUI " – "Tuner Information" is
not "OFF" .
• Set when "Manual
– "GUI" – " iPod Information" is
not "OFF" .
ENGLISH
Page
12
–
–
Page
12 ~ 16
–
46
–
to interlace
15
recorder
–
HDMI or 9
button on the
button on
32
32
32
Setup" 32