Settings; Making The Optimum Settings For The Connected Speakers - Denon AVR-890 Owner's Manual

Set the channel to be measured (Channel Select)
• Front
The front speaker to be measured can be selected ahead of time
here.
• Subwoofer, Surround Back
If you set the channels you will not use beforehand, those channels
will not be measured. Therefore, you can save an amount of time
commensurate with that which would have been taken to measure
those channels.
1
ui
Press to select
A U T O S E T U P
A U D Y S S E Y
"Channel Select",
S T E P 1 P r e p a r a t i o n
C o n n e c t t h e
then press .
a n d p l a c e t h e m
i n g t o t h e r e c o m m e n d a -
a t i o n s i n t h e
S e t t h e f o l l o w i n g
i t e m s i f n e s e s s a r y .
A m p A s s i g n
C h a n n e l S e l e c t
A u t o S e t u p
S k i p u n u s e d c h ' s
2
Press to select a channel, press
ui
the item, and then press
.
n Front
A
: The sound is output from front speakers A when measuring
the front speakers.
B
: The sound is output from front speakers B when measuring
the front speakers.
A + B
: The sound is output simultaneously from front speakers A
and B when measuring the front speakers.
n Subwoofer, Surround Back
Measure
: Default setting. Measure the selected channel.
Skip : Skip the selected channel and do not measure.
b To cancel, press .
When "Amp Assign" is set to "Normal", only then is "Surround Back"
displayed.
Remote control
operation buttons
d : Performing Audyssey Auto Setup
• Audyssey Auto Setup detects the presence of each speaker and
automatically calculates the speaker size, channel level, distance,
and optimal crossover frequency setting. Audyssey MultEQ ®
corrects acoustical distortions within the listening area.
• Once started, MultEQ will play a series of test tones through each
speaker.
• Before starting, connect and position all of your speakers.
STEP2 Speaker Detection
1
A U T O S E T U P M u l t E Q
ui
Press
[ 1 / 6 ]
s p e a k e r s
.
a c c o r d -
m a n u a l .
2
Select
S t a r t
and then press
E N T E R E n t e r R E T U R N C a n c e l
m e a s u r e m e n t f o r t i m e s a v i n g .
to select
o p
3
Once all the speakers have been detected, check the
results of detection of the connected speakers.
4
Press
select "Next
Measurement", then
press .
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Making the Optimum Settings for the Connected Speakers Automatically (Audyssey™ Auto Setup)
to select "Auto Setup Start", then press
"Measure"
A U T O S E T U P
A U D Y S S E Y A U T O S E T U P M u l t E Q
.
S T E P 2 S p e a k e r D e t e c t i o n
P l e a s e p l a c e t h e m i c -
r o p h o n e a t e a r h e i g h t
a t m a i n l i s t e n i n g
p o s i t i o n .
M e a s u r e
E N T E R E n t e r R E T U R N C a n c e l
Te s t T o n e w i l l s t a r t f o r m e a s u r e m e n t
ui
to
A U T O S E T U P
A U D Y S S E Y A U T O S E T U P M u l t E Q
1
S T E P 2 S p k r D e t e c t C h e c k
F r o n t Y e s
C e n t e r Y e s
S u b w o o f e r Y e s
S u r r o u n d Y e s
S . B a c k Y e s
2 s p k r s
R e t r y
N e x t M e a s u r e m e n t
E N T E R E n t e r R E T U R N C a n c e l
G o t o S t e p 3 ( M e a s u r e m e n t ) a f t e r s p e a k e r c h e c k
STEP3 Measurement
5
Once the screen on
the right appears,
S T E P 3
move the setup P l e a s e
r o p h o n e
a t
microphone to the
p o s i t i o n .
second position,
ui
use to select
"Measure", then
S t a r t
press .
Measurements for the second position begin.
b To skip this step, select "Next 1 Calculation" and proceed to
STEP4 .
6
Perform Step 5 repeatedly for the 3rd, 4th, 5th, and
6th measurements.
[ 2 / 6 ]
Once measurements for the sixth position are completed,
"Measurements finished." is displayed.
b Measure at a total of six positions, including the main listening
position and positions around it. It is possible to stop the settings
with five positions or fewer, but for better results we recommend
measuring at six positions.
STEP4 Calculation
7
Once measurements
[ 2 / 6 ]
are finished, use
S T E P 3
ui
to select "Next P l e a s e
r o p h o n e
a t
1 Calculation", then p o s i t i o n .
press .
Analysis begins.
P r o c e e d
b Analysis takes several
minutes to complete.
The time required for
this analysis depends on
S T E P 4
N o w
the number of speakers
P l e a s e
connected. The greater
■ ■ ■ ■ ■
2 5 %
the number of speakers
connected, the longer
analysis will take.
: Decision the setting : Return to previous menu
ENGLISH
A U T O S E T U P
A U D Y S S E Y A U T O S E T U P M u l t E Q
[ 3 / 6 ]
M e a s u r e m e n t
p l a c e t h e m i c -
a t e a r h e i g h t
2 n d l i s t e n i m g
M e a s u r e
N e x t C a l c u l a t i o n
E N T E R E n t e r R E T U R N C a n c e l
n e x t m e a s u r e m e n t . T e s t T o n e w i l l s t a r t
A U T O S E T U P
A U D Y S S E Y A U T O S E T U P M u l t E Q
M e a s u r e m e n t [ 3 / 6 ]
p l a c e t h e m i c -
a t e a r h e i g h t
2 n d l i s t e n i m g
M e a s u r e
N e x t C a l c u l a t i o n
E N T E R E n t e r R E T U R N C a n c e l
t o S t e p 4 ( A n a l y z e )
⇩
A U T O S E T U P
A U D Y S S E Y A U T O S E T U P M u l t E Q
C a l c u l a t i o n [ 4 / 6 ]
c a l c u l a t i n g . . .
w a i t .
See overleaf
2