Settings - Denon AVR-890 Owner's Manual

ENGLISH
Changing the Input Source's Input Mode and
Decoding mode (Input Mode)
The selectable input modes depend on the input source and "Input Assign" setting (vpage 35
"Changing the input sources assigned to the input terminals").
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes for HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS)
the different input sources. Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
EXT. IN : Play only signals from EXT. IN input.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
source
Default
setting
Input
source
Default
setting
• The "HDMI" settings are made for input sources for which HDMI
input terminals are assigned at "Input Assign" (vpage 35).
• The "Digital" settings are made for input sources for which digital
input terminals are assigned at "Input Assign" (vpage 35).
• When a digital signal is properly input, the "
the display. If the "
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN" .
• This can also be set by pressing
Each time you press the button, the input mode display will change.
Remote control

operation buttons
Default settings are underlined.
Setting contents
DVD HDP TV SAT/CBL
Auto HDMI Digital Auto
DVR V.AUX CD TUNER
Auto Auto Analog Analog
" indicator lights on
" indicator does not light, check the digital
.
Auto HDMI Digital
EXT. IN Analog
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Setting items
Decode Mode
Set the input source's
decoding mode.
Changing the Input Source's Display Name (Rename)
Use this procedure to change the display name of the currently selected input source.
VCR
Setting items
Analog
Rename
Change the input source's
display name to the desired
name.
Default
The changed display names
are reset to the defaults.
Making the input settings (Input Setup)
Setting contents
Auto : Detect type of digital input signal and decode and play
automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This can be set for input sources for which "HDMI" or "Digital" is
assigned at "Input Assign" (vpage 35).
• Normally set this to "Auto" .
Default settings are underlined.
Setting contents
1. Use o p to set the cursor to the character you want to change.
2. Use ui to change the character, then press
• Up to 8 characters can be input.
• The input character type can be switched by pressing
display name is being changed.
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
GNumbersH 0123456789 (Space)
Yes : Reset to the defaults.
No : Do not reset to the defaults.
: Decision the setting : Return to previous menu
.
while the