Settings - Denon AVR-890 Owner's Manual

ENGLISH
Setting items
Quick Select Name Rename Label : Change the display name of the selected "Quick Select"
Change the Quick Select setting.
name. 1. Use
to change, then press
2. Use
3. Use
• Up to 16 characters can be input.
• The input character type can be switched by pressing
display name is being changed.
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
GNumbersH 0123456789 (Space)
4. Repeat steps 2 and 3 to change the display name.
Zone Rename
1. Use
Rename the display names
of the different zones as
MAIN ZONE / ZONE2
desired.
2. Use
3. Use
• Up to 10 characters can be input.
• The input character type can be switched by pressing
display name is being changed.
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
GNumbersH 0123456789 (Space)
4. Repeat steps 2 and 3 to change the display name.
Remote control

operation buttons
Setting contents
ui
to select the name of the Quick Select setting you want
.
o p to set the cursor to the character you want to change.
ui
to change the character, then press
ui to select the zone name you want to change, then press
.
o p to set the cursor to the character you want to change.
ui
to change the character, then press
Displaying the menu
:
Cancel the menu
Setting items
Remote ID
Set when you
another DENON AV amplifier
with the remote control unit
of the AVR-890. Match the
. remote control unit you are
using with the remote ID of
the AVR-890.
while the
Dimmer
Adjust display brightness of
the receiver.
Setup Lock
Protect

settings

inadvertent change.
.
while the
: Moves the cursor (Up/Down/Left/Right)
Making detailed settings (Manual Setup)
Setting contents
1 / 2 / 3 / 4
operate
When using the AVR-890 with only the included remote control unit
(RC-1117), use Remote ID "1" (default).
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
• Bright : Normal display brightness.
• Dim : Reduced display brightness.
• Dark : Very low display brightness.
• OFF : Turns the display off.
Switching is also possible by pressing
• ON : Turn protection on.
from • OFF : Turn protection off.
When "Setup Lock" is set to "ON" , the settings listed below can
no longer be changed. Also, "SETUP LOCKED!" is displayed if you
attempt to operate related settings.
・RESTORER
・MultEQ
・Dynamic EQ
: Decision the setting
on the main unit.
・Dynamic Volume
・Channel Level
・Audio Delay
: Return to previous menu