Settings - Denon AVR-890 Owner's Manual

Setting items
Speaker Config. Surround : Set the presence and size of the Surround speakers.
• Large : Use of a large speaker that can adequately play back low
Select speaker configuration
frequencies.
and size.
• Small Use of a small speaker that has inadequate playback capacity for
:
(bass reproduction capability)
low frequencies.
• None : Select when the surround speakers are not connected.
"Large" is not displayed when "Front" is set to "Small".
S.Back : Set the presence, size and number of surround back speakers.
"S.Back" is displayed
• Large : Use of a large speaker that can adequately play back low
when the "Amp Assign"
frequencies.
setting (vpage 27) is
• Small : Use of a small speaker that has inadequate playback capacity for
set to "Normal" .
low frequencies.
• None : Select when the surround back speakers are not connected.
• 2sp : Use two surround back speakers.
• 1sp : Use only one surround back speaker. Surround back audio is output
from the surround back L terminal.
• "Large" is not displayed when "Surround" is set to "Small".
• Even if "S.Back" is set to "Large" , the "S.Back" setting is automatically
switched to "Small" if "Surround" is set to "Small" .
NOTE
Even when the Surround Back Speaker setting is other than "None" ,
sound may not be emitted from the surround back speaker, depending
on the playback source. In this case, "Surround Back" setting other
than "OFF" (vpage 47).
Front Height : Set the front height speaker size.
"Front Height" is
• Large : Use of a large speaker that can adequately play back low
displayed when the " Amp
frequencies.
Assign" setting (vpage
• Small : Use of a small speaker that has inadequate playback capacity for
27) is set to "Front
low frequencies.
Height" .
• None : Select when a front height speaker is not connected.
• "Large" is not displayed when "Front" is set to "Small".
NOTE
• Even if "Front Height" is set to "Large", the "Front Height" setting
Select "Large" or "Small" not
is automatically switched to "Small" if "Front" is set to "Small".
according to the physical size
of the speaker but according
to the low frequency
reproduction capabilities
based on the frequency set
at "Crossover Frequency"
(vpage 29).
Remote control
operation buttons
Setting contents
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Setting items
Bass Setting Subwoofer Mode : Select low range signal to be reproduced by
subwoofer.
Make the settings related to
• LFE : Add the low frequency signal of the channel for which the speaker
playback of low frequency
size is set to "Small" to the subwoofer signal and output it.
signals (subwoofer and LFE).
• LFE+Main : Add the low frequency signal of all channels to the subwoofer
This can be set when
signal and output it.
"Speaker Config. " –
• Play music or a movie source and select the mode offering the
"Subwoofer" (vpage
strongest bass.
27) is set to "Yes" .
• Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
LPF for LFE : Set the upper limit of the low frequency signals output from
the subwoofer.
• 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Distance Unit : Set the unit of distance.
• Feet
Set the distance from the
listening position to the • Meters
speakers. Step : Set the minimum variable width of the distance.
Measure the distance from • 1ft / 0.1ft
•
the listening position to the 0.1m / 0.01m
speakers beforehand. • FL (Front L)/ FR (Front R)/ C (Center)/ SW (Subwoofer)/ SL (Surround L)/
SR (Surround R/ SBL (Surr. Back L)/ SBR (Surr. Back R)/ FHL (Front Height L)/
FHR (Front Height R) : Select the speaker you want to set, and set the
distance. Set the value that is closest to the measured distance.
• 0.0ft ~ 60.0ft / 0.00m ~ 18.00m
• The speakers that can be selected differ depending on the "Amp Assign"
(vpage 27) and "Speaker Config. " (vpage 27) settings.
• Default settings :
Front/Center/Subwoofer/Front Height : 3.6 meters (12 feet)
Surround/Surr. Back : 3.0 meters (10 feet)
NOTE
Set the difference in the distance between the speakers to less than 6.0
meters (20 feet). "Relocate Speaker" is displayed on the screen if an
inappropriate distance is set.
Default : Reset all distance settings to factory default.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
: Decision the setting
ENGLISH
Making detailed settings (Manual Setup)
Setting contents
See overleaf
28
: Return to previous menu