Settings; Making The Optimum Settings For The Connected Speakers - Denon AVR-890 Owner's Manual

ENGLISH
STEP5 Check
8
Use ui to select the item you want to check, then
press .
The measurement result
S T E P 5
confirmation screen is
C h e c k
u l t s . T o
displayed.
" N e x t "
S p k r
D i s t a n c e
C h . L e v e l
b
Subwoofer or other C r o s s o v e r
N e x t
speakers may be set to
a value that does not
S e l e c t
correspond to the actual
distance.
9
Press .
This returns you to analysis results items, so repeat step 8.
10
Press i to select "Next 1 Store", then press
STEP6 Store
11
Select "Store", then
press .
S T E P 6
P r e s s
c a l c u l a t i o n
"Now Storing... Please
wait." is displayed on the
S t o r e
GUI menu while the results
are being stored.
A p p l y
NOTE
Do not turn the power off while the settings are being stored.
12
Disconnect the setup microphone from the AVR-
890.
13
Select "Exit" and then press
Remote control
2
operation buttons
Exiting the GUI Menu
n
Press
The GUI menu display disappears.
NOTE
A U T O S E T U P
A U D Y S S E Y A U T O S E T U P M u l t E Q
Do not change the speaker connections or subwoofer volume,
C h e c k [ 5 / 6 ]
p r o c e s s i n g r e s -
or speaker locations after making measurements. If changes are
p r o c e e d , p r e s s
necessary, make the changes and use Audyssey™ Auto Setup once
C o n f i g C h e c k
C h e c k
C h e c k
again for an updated EQ solution.
C h e c k
S t o r e
E N T E R E n t e r R E T U R N C a n c e l
i t e m t o c h e c k
• If the result differs from the actual connection status or an error
message appears, use
to repeat the measurement.
• If the result still differs from the actual connection status after
re-measurement or the error message still appears, it is possible
that the speakers are not connected properly. Turn the AVR-890
off, check the speaker connections and repeat the measurement
.
process from the beginning.
• For instance, If the location or direction of a speaker is altered,
Audyssey Auto Setup should be performed again to ensure the
correct EQ solution for the new room configuration.
A U T O S E T U P
A U D Y S S E Y A U T O S E T U P M u l t E Q
S t o r e [ 5 / 6 ]
" S t o r e " t o s t o r e
r e s u l t s .
E N T E R E n t e r R E T U R N C a n c e l
a n d s t o r e m e a s u r e m e n t r e s u l t .
.
Displaying the menu
:
Cancel the menu
Making the Optimum Settings for the Connected Speakers Automatically (Audyssey™ Auto Setup)
while the GUI menu is displayed.
ui
to GUI menu "Retry" and then press
: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu