Denon AVR-890 Owner's Manual page 18

Denon av surround receiver user manual
Hide thumbs Also See for AVR-890:
Table of Contents

Advertisement

ENGLISH
Record Player
Turntable
(MM cartridge)
L
R
The AVR-890 is compatible with record players with an MM
cartridge. When you connect to a record player with an MC
cartridge, use a commercially available MC head amp or a step-
up transformer.
When you increase the volume without connecting the record
player, there may be "booming" noise from the speakers.
NOTE
The SIGNAL GND terminal of the AVR-890 is not a safety ground
connection. Connect it to reduce noise when noise is excessive.
Note that depending on the record player, connecting the ground
line may have the reverse effect of increasing noise. In this case,
it is not necessary to connect the ground line.

Recording Components
Digital Video Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting Devices Equipped
with HDMI terminals" on page 12.
DVD Recorder
L
R
L
R
Set as necessary
Set this to change the input signal to which the input source is
assigned.
"Input Assign" (vpage 35)
NOTE
• To record video signals through the AVR-890, use the same type of video
cable for connection between the AVR-890 and the player as the cable used
for connection between the AVR-890 and the recorder.
• Do not connect the output of the component connected to the AVR-890's
OPTICAL2 output connector to any input connector other than OPTICAL2.
• Digital signals are not output from the analog REC OUT connector.
Connecting Devices not Equipped with HDMI terminals
Video Cassette Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting
Devices Equipped with HDMI terminals" on page 12.
Video cassette recorder
L
R
L
R
L
R
L
R
Set as necessary
Set this to change the input signal to which the input
source is assigned.
"Input Assign" (vpage 35)
NOTE
• To record video signals through the AVR-890, use the same
type of video cable for connection between the AVR-890 and
the player as the cable used for connection between the AVR-
890 and the recorder.
• Digital signals are not output from the analog REC OUT
connector.
L
R
L
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents