Table of Contents
Advertisement
USB Application > SAMBA > Add Rule
Fig ure 32
The following table describes the labels in this screen.
Table 18 USB Application > SAMBA > Add Rule
L ABEL
Status
User Name
Password
USB
Apply
Cancel
8.4.2 FT P Se rve r Sc re e n
Use this screen to set up file sharing via the NBG7815 using FTP and create user accounts.
Click
USB Applic a tio n
Chapter 8 Applications
DESC RIPT IO N
Select
to enable the account.
Ena b le
Select
to disable the account.
Disa b le
Enter a user name that will be allowed to access the shared files. You can enter up
to 20 characters. Only letters and numbers allowed.
Enter the password used to access the shared files. You can enter up to 20
characters. Only letters and numbers are allowed. The password is case sensitive.
Specify the user's access rights to the USB storage device which is connected to the
NBG7815's USB port.
- The user has read and write rights, meaning that the user can create
Re a d & Write
and edit the files on the connected USB device.
- The user has read rights only and can not create or edit the files on the
Re a d
connected USB device.
- The user cannot access the files on the USB device(s) connected to the USB
No ne
port.
Click
to save your changes back to the NBG7815.
Apply
Click
to exist the screen without saving.
C a nc e l
>
to show the following screen.
FT P
NBG7815 User's Guide
70
Advertisement
Table of Contents
