Ftp Server - ZyXEL Communications NBG7815 User Manual

Table 22 USB Application > SAMBA > Add Rule (continued)
LABEL
USB
APPLY
CANCEL

8.4.2 FTP Server

Use this screen to set up file sharing through the NBG7815 using FTP and create user accounts.
Click USB Application > FTP to show the following screen.
Figure 35 USB Application > FTP
The following table describes the labels in this screen.
Table 23 USB Application > FTP
LABEL
Enable FTP
Port
User Accounts
No.
Chapter 8 Applications
DESCRIPTION
Specify the user's access rights to the USB storage device which is connected to the
NBG7815's USB port.
Read & Write – The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read – The user has read rights only and cannot create or edit the files on the
connected USB device.
None – The user cannot access the files on the USB devices connected to the USB
port.
Click APPLY to save your changes back to the NBG7815.
Click CANCEL to exit the screen without saving.
DESCRIPTION
Select this to enable the FTP server on the NBG7815 for file sharing using FTP.
You may change the server port number for FTP if needed. However, you must use the same
port number in order to use that service for file sharing.
Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
This is the index number of the user account.
NBG7815 User's Guide
75