Connecting The Scsi And Power Cables; Figure 7 Sliding The Valueloader Into The Rack Slot - Freecom VALUELOADER LTO User Manual

Lto tape autoloader

Table of Contents

Figure 7 Sliding the

ValueLoader into the

Rack Slot

Connecting the SCSI and Power Cables

Slide the ValueLoader onto the rails and secure the mounting

bracket to the rack using the screws and clip nuts from the

rackmount hardware package, as shown in

To connect the SCSI and power cables to the ValueLoader, follow

these steps:

Shut down and turn off the selected server. Turn off all

attached accessory devices, such as printers and other SCSI

devices. Remove the power cables from the server and all

attached accessories.

Failure to remove the power cables from these

Caution:

devices may result in damage to the

ValueLoader.

ValueLoader LTO Tape Autoloader User Manual

Installing the ValueLoader

figure

Table of Contents

Valueloader