Table of Contents
Advertisement
ValueLoader Administration
Running the ValueLoader System Test
3
Using SCSI
Running the ValueLoader System Test
42
If you removed a data cartridge to make room for the firmware
7
upgrade cartridge, import the data cartridge to its original slot.
See
Importing Cartridges
After a firmware update, the firmware revision
Note:
displayed on the LCD is not changed until the
ValueLoader is power cycled.
Quantum has files and instructions necessary to update the drive
and ValueLoader firmware via SCSI. Refer to our Web site for
details.
The System Test option cycles the ValueLoader through the
process of loading and unloading all cartridges in the carousel.
Running a System Test verifies the operational soundness of both
the ValueLoader and tape drive. The System Test continues
indefinitely until you press the
and restore operations are suspended while a System Test is in
progress.
At least one cartridge must be present in the carousel in
Note:
order to run System Test.
To run a System Test:
From the Home Screen or main menu, press the
1
until "Diagnostics" appears on the top line of the LCD screen.
Press the
2
[Enter]
LCD screen.
Press the
3
[Enter]
ValueLoader LTO Tape Autoloader User Manual
on page 27 for instructions.
[Cancel]
button to select. "System Test" appears on the
button to begin the test.
button. All regular backup
or
[+]
[-]
3
button
Advertisement
Table of Contents
Troubleshooting
