Loading Cartridges; Unloading Cartridges - Freecom VALUELOADER LTO User Manual

Operating the ValueLoader
Using Cartridges
Loading
2
Cartridges
Unloading
2
Cartridges
30
This option loads a cartridge from the ValueLoader carousel into
the tape drive. To use this option, follow these steps:
From the Home Screen or main menu, press the
1
until "Commands" appears on the top line of the LCD screen.
Then, press
[Enter]
Press the or
2 [+] [-]
LCD screen.
Press the
3 [Enter]
Press the or
4 [+] [-]
on the LCD screen and press the
number you select indicates the cartridge to be loaded into the
tape drive.
Only slot numbers that contain cartridges are
Note:
displayed.
Status messages appear while the cartridge is loading. "Drive
Stopped" appears when the operation is complete.
Press the
5 [Cancel]
cartridge.
This option unloads the cartridge from the tape drive into its
original slot. To use this option, follow these steps:
From the Home Screen or main menu, press the
1
until "Commands" appears on the top line of the LCD screen.
Then, press
[Enter]
Press the or
2 [+] [-]
the LCD screen. Then, press the
cartridge from the tape drive.
Status messages appear while the cartridge is unloading.
"Drive Empty" appears when the operation is complete.
Press the
3 [Cancel]
cartridge.
ValueLoader LTO Tape Autoloader User Manual
.
button until "Load Cartridge" appears on the
button to select.
button until the desired slot number appears
[Enter]
button when you are done loading the
.
button until "Unload Cartridge" appears on
[Enter]
button when you are done unloading the
or button
[+] [-]
button. The slot
or button
[+] [-]
button to unload the