Adjusting Copy Options; Basic Settings - Xerox WorkCentre 5325 User Giude

Copying

Adjusting Copy Options

This section includes:
•

Basic Settings

on page 94
• Image Quality Adjustments
• Layout Adjustments
• Output Format Adjustments
• Advanced Copying
Basic Settings
The Copy tab appears when the touch screen Copy button is touched. Use the Copy tab to change the
following basic settings:
• Reducing or Enlarging the Image
• Selecting the Tray to Use for Copies
• Specifying 2-Sided Originals or Copies
• Collated Copies on page 95
• Uncollated Copies
• Stapling Copies on page 96
• Creasing Copies on page 97
• Hole Punching Copies
• Creating Booklets
Reducing or Enlarging the Image
To reduce or enlarge the image:
1. Touch Copy on the touch screen.
2. To reduce or enlarge the image proportionally, do one of the following:
• Touch the plus or minus (+/–) buttons.
• Touch Reduce/Enlarge, then touch the plus or minus (+/–) buttons.
3. To reduce or enlarge the image proportionally by a preset amount, such as to fit a particular
paper size:
a. Touch Reduce/Enlarge.
b. Touch Proportional %, then touch one of the Preset % buttons.
Note: You can also use the arrow buttons to change the percentage.
To center the image on the page, touch Auto Center.
c.
d. Touch Save.
4. To reduce or enlarge the width and length of the image by different percentages:
a. Touch Reduce/Enlarge, then touch Independent X–Y%.
b. To scale the width (X axis) of the image, touch the Width percentage arrow buttons.
94 WorkCentre 5300 Series Multifunction Printer
User Guide
on page 98
on page 99
on page 103
on page 108
on page 94
on page 95
on page 95
on page 96
on page 97
on page 97