. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
2-32
Removal and Replacement Procedures
4. Push the levers on each end of the memory module .
5. Pull the module from the board .
Figure 2-29. Removing a DIMM from the Processor Board (ProLiant 1600 only)
Figure 2-30. Removing a DIMM from the Memory Expansion Board
Reverse steps 1 through 5 to replace the DIMM. The DIMM can be installed in only one
way. Match the notch on the module with the tab on the memory socket. Push the module
down into the socket, making sure that the module is fully inserted and properly seated.
1
2
2
1
1
1