Compaq 1600R - ProLiant - 128 MB RAM Maintenance And Service Manual page 132

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
3-78 Diagnostic Tools
Hardware Requirements
To use this level of ASR-2 over a modem, you need the following:
You can also run Compaq Utilities remotely over an IPX or IP network using the Network
feature:
If you are notified that ASR-2 restarted the server and you have restarted to Compaq
Utilities, use the Inspect Utility or Compaq Insight Manager to view the critical error in the
Critical Error Log. Run Diagnostics to diagnose and resolve the problem.
You can configure ASR-2 to restart the server into Compaq Utilities to diagnose the critical
error, or to start the operating system to return the server to operational status as rapidly as
possible.
When you enable ASR-2 to start the operating system, the server tries to start from the
primary partition. In this mode, ASR-2 can page you if a critical error occurs, but you
cannot access Compaq Utilities.
When you enable ASR-2 to start Compaq Utilities, your server restarts after a critical error
and loads Compaq Utilities from the system partition on the hard drive.
You can configure your server to start Compaq Utilities in four different ways:
Compaq modem or optional Hayes modem
System Configuration Utility and Diagnostics Utility installed on the system
partition of the hard drive
ASR-2 configured to load Compaq Utilities after restart
To use Compaq Utilities on an IPX network, you must have Compaq Insight
Manager 2.0 or later or an NVT (Novell Virtual Terminal) Terminal Emulator with
VT100 or ANSI terminal capabilities.
To use Compaq Utilities on an IP network, you must have Compaq Insight Manager
2.10 or later, or a Telnet Terminal Emulator with VT100 or ANSI capabilities.
Without remote console support; for example, to run Compaq Utilities from the
server console only
With remote console support using modems for dial-in access
With remote console support using a modem to dial a predetermined telephone
number
With remote console support through a network connection (IP or IPX)