Sata Settings Screen - Dell PowerEdge R410 Hardware Owner's Manual

Option
Logical Processor
(Enabled default)
Virtualization Technology
(Disabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
Turbo Mode
(Enabled default)
C States
(Enabled default)
Processor 1 Family -Model-
Stepping

SATA Settings Screen

Option
Embedded SATA
(ATA Mode default)
Port A
(Auto default)
Port B
(Off default)
Port C
(Off default)
62
Using the System Setup Program and UEFI Boot Manager
Description
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
Enables or disables Execute Disable Memory Protection
Technology.
If set to All, the maximum number of cores in each
processor is enabled.
If Turbo Boost Technology is supported by the
processor(s), enables or disables Turbo Mode.
When set to Enabled, the processor(s) can operate in all
available power states.
Displays the family, model, and stepping of the selected
processor.
Description
ATA Mode enables the integrated SATA controller. Off
disables the controller.
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port C. Off disables BIOS support for the device.