Lcd Panel Features (Optional) - Dell PowerEdge R410 Hardware Owner's Manual

Item Indicator, Button, or
Connector
6 System identification
button
7 USB connectors (2)
8 Hard drives (4)
9 System identification
panel
10 Optical drive
(optional)

LCD Panel Features (Optional)

The system's LCD panel provides system information and status and error
messages to signify when the system is operating correctly or when the system
needs attention. See "LCD Status Messages (Optional)" on page 23 for
information on specific status codes.
The LCD backlight lights blue during normal operating conditions and lights
amber to indicate an error condition. When the system is in standby mode,
the LCD backlight will switch off after five minutes of inactivity, and can be
turned on by pressing the Select button on the LCD panel. The LCD
backlight will remain off if LCD messaging is turned off through the BMC or
iDRAC utility, the LCD panel, or other tools.
12
About Your System
Icon Description
The identification buttons on the front
and back panels can be used to locate
a particular system within a rack.
When one of these buttons is pushed,
the LCD panel on the front and the blue
system status indicator on the back blink
until one of the buttons is pushed again.
Connects USB devices to the system.
The ports are USB 2.0-compliant.
Up to four 2.5-inch in 3.5-inch HDD hot
swap carrier or up to four 3.5-inch
cabled/hot swap.
A slide-out panel for system information
including the Express Service tag,
embedded NIC MAC address, and
iDRAC6 Enterprise card MAC address.
One optional slim-line SATA
DVD-ROM drive or DVD+/-RW drive.
NOTE:
DVD devices are data only.