Dell PowerEdge R410 Hardware Owner's Manual page 83

Figure 3-3. Removing and Replacing the System Cover
1 latch release lock
Closing the System
1 Place the cover onto the chassis and offset it slightly towards the back of
the system, so that the two hooks on the back edge of the cover fit over the
corresponding slots on the back edge of the chassis. See Figure 3-3.
2 Slide the cover towards the front of the chassis till it snaps in position.
3 Rotate the latch release lock in a clockwise direction to secure the cover.
1
2 indent
Installing System Components
2
83