Dell PowerEdge R410 Hardware Owner's Manual page 60

Option
Processor Settings Displays information related to microprocessors (speed, cache
SATA Settings
Boot Settings
Integrated Devices See "Integrated Devices Screen" on page 64.
PCI IRQ
Assignment
Serial
Communication
(Off default)
Embedded Server
Management
Power
Management
System Security
Keyboard
NumLock
(On default)
Report Keyboard
Errors
(Report default)
F1/F2 Prompt on
Error (Enabled
default)
60
Using the System Setup Program and UEFI Boot Manager
Description
size, and so on). See "Processor Settings Screen" on page 61.
See "SATA Settings Screen" on page 62.
See "Boot Settings Screen" on page 63.
Displays a screen to change the IRQ assigned to each of the
integrated devices on the PCI bus, and any installed expansion
card that requires an IRQ.
See "Serial Communication Screen" on page 65.
See "Embedded Server Management Screen (Optional)" on
page 66.
See "Power Management Screen" on page 66.
Displays a screen to configure the system password and setup
password features. See "System Security Screen" on page 67,
"Using the System Password" on page 71, and "Using the Setup
Password" on page 74 for more information.
Determines whether your system starts up with the NumLock
mode activated on 101- or 102-key keyboards (does not apply to
84-key keyboards).
Enables or disables reporting of keyboard errors during the
POST. Select Report for host systems that have keyboards
attached. Select Do Not Report to suppress all error messages
relating to the keyboard or keyboard controller during POST.
This setting does not affect the operation of the keyboard itself if
a keyboard is attached to the system.
Enables the system to halt on errors during POST, which allows
the user to observe events that may scroll by unnoticed during
normal POST. You can select F1 to continue or F2 to enter the
System Setup program.
CAUTION:
When setting this option to Disabled, the system
will not halt if an error occurs during POST. Any critical
errors will be displayed and logged in the system event log.