Figure 3-5. Removing and Installing a Hot-Swap Hard Drive
1
release button
Installing a Hot-Swap Hard Drive
CAUTION:
the SAS/SATA backplane.
CAUTION:
installed. Inserting a hard-drive carrier and attempting to lock its handle next to a
partially installed carrier can damage the partially installed carrier's shield spring
and make it unusable.
CAUTION:
installation. See the documentation supplied with the operating system.
CAUTION:
configuration is not supported.
86
Installing System Components
1
2
Use only hard drives that have been tested and approved for use with
When installing a hard drive, ensure that the adjacent drives are fully
Ensure that your operating system supports hot-swap drive
Combining SATA and SAS hard drives in the same system
2
hard-drive carrier handle