Sata Settings Screen - Dell PowerEdge FC630 Owner's Manual

Menu Item
Hardware Prefetcher
DCU Streamer Prefetcher
DCU IP Prefetcher
Execute Disable
Logical Processor Idling
Configurable TDP
X2Apic Mode
Dell Controlled Turbo
Number of Cores per
Processor
Processor 64-bit Support
Processor Core Speed
Processor 1
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores

SATA Settings screen

You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on
your system.
You can view the SATA Settings screen by clicking System Setup Main Menu → System BIOS → SATA
Settings.
20
Description
Enables or disables the hardware prefetcher. By default, the Hardware
Prefetcher option is set to Enabled.
Allows you to enable or disable the Data Cache Unit (DCU) streamer
prefetcher. By default, the DCU Streamer Prefetcher option is set to
Enabled.
Enables or disables the Data Cache Unit (DCU) IP prefetcher. By default,
the DCU IP Prefetcher option is set to Enabled.
Enables or disables the execute disable memory protection technology.
By default, the Execute Disable option is set to Enabled.
Enables or disables the operating system capability to put logical
processors in the idling state in order to reduce power consumption. By
default, the option is set to Disabled.
Allows reconfiguration of Thermal Design Power (TDP) to lower levels.
TDP refers to the maximum amount of power the cooling system is
required to dissipate.
Enables or disables the X2Apic mode.
NOTE: Depending on the number of installed CPUs, there may be
up to four processor listings.
Controls the turbo engagement. Enable this option only when System
Profile is set to Performance.
Controls the number of enabled cores in each processor. By default, the
Number of Cores per Processor option is set to All.
Specifies if the processor(s) support 64-bit extensions.
Displays the maximum core frequency of the processor.
NOTE: Depending on the number of installed CPUs, there may be
up to four processor listings. The following settings are displayed for
each processor installed in the system.
Displays the family, model and stepping of the processor as defined by
Intel.
Displays the brand name reported by the processor.
Displays the total L2 cache.
Displays the total L3 cache.
Displays the number of cores per processor.
Get other manuals https://www.bkmanuals.com