Dell PowerEdge R410 Hardware Owner's Manual page 106

3 Grasping the tabs, gently lift the shroud straight up and away from the
system board. See Figure 3-15.
4 Remove the system board shroud.
Figure 3-15. Installing and Removing the System Board Shroud
1
1 power distribution board shroud
3 tabs (2)
Installing the System Board Shroud
1 Align the shroud using center of the numbered fan bays as a guide and
locate the tab projection on the left side of the fan module numbered 3.
See Figure 3-15.
2 Push the system board shroud down until all edges are seated in the slots,
securing the shroud to the system board.
3 Close the system. See "Opening and Closing the System" on page 82.
106
Installing System Components
3
2 system board shroud
2