Auxiliary Functions - Minolta DI450 Operator's Manual

7. Auxiliary Functions

Auxiliary Functions
Panel Resetting
The Panel Reset key resets all control panel
settings to default settings including the number of
copies and zoom ratio. The settings just made
would also be cleared.
Useful Tips
• The Panel Reset key enables you to cancel all
previous settings at the touch of the key.
• To avoid miscopy, try to press this key before
making any setting for your own copy job.
Auto Panel Reset
If no key on the control panel is pressed within 1
min. after a copy cycle has been completed or
copying settings made, the Auto Panel Reset
function is activated to return the machine to the
default settings.
Useful Tip
The time for the machine to enter the Auto Panel
Reset Function can be selected from among "30
sec.", "1 min.", "2 min.", "3 min.", or "5 min."
For details, see "User's Choice."
Auto Copy Start
If you load originals in the document handler or
place an original on the glass and press the Start
key while the machine is warming up after it has
been turned ON, the Auto Copy Start function
allows that copy process to be started as soon as
the machine completes warming up.
Auto Shut Off
<Only when the Printer Controller is not
mounted>
The Auto Shut OFF function shuts down the
machine a given period of time after the machine
has been used last. The initial setting is 90 min.
Useful Tip
The time for the machine to enter the Auto Shut
OFF mode can be selected from 15 min. to 90
min. The Auto Shut OFF function can even be
disabled.
For details, see "User's Choice."
Sleep
<Only when the Printer Controller is mounted>
To save power, this machine is automatically set
into the standby state (power save mode) after the
lapse of a given period of time after it has been
used last. Sleep saves more power than Energy
Saver, but takes more time before the machine
enters the mode. The initial setting is 90 min.
To let the machine exit from the mode, press any
key on the control panel.
Useful Tip
The time for the machine to enter the Sleep mode
can be selected from 15 min. to 90 min. The Sleep
function can even be disabled.
For details, see "User's Choice."
Energy Saver
Energy Saver keeps the machine in the standby
state (power save mode) instead of shutting it
down.
To set the machine into the Energy Saver mode,
you need only to press the Energy Saver key. Or, a
p. 5-16
given period of time after the machine has been
touched last, it automatically enters the Energy
Saver mode. The initial setting is 15 min.
To cancel the Energy Saver mode, press any key
on the control panel.
NOTE
The machine is automatically shut down if the
Auto Shut OFF function is activated while it is in
the Energy Saver mode.
Useful Tip
The time for the machine to enter the Energy
Saver mode can be selected from 1 min. to 90
min.
For details, see "User's Choice."
p.5-16
2-19
p.5-16
p. 5-16