Table of Contents
Advertisement
5-22
5. Administrator Mode
Programming the Access Code
An access code can be programmed when "100 Accounts" is selected.
1
To show [Copy Track] on the Touch Panel,
follow the steps given in "Selecting the
Administrator Mode." p.5-18
2
Touch [Copy Track Data].
3
Select the page number on which the target
account is shown.
4
Touch the Access Code key of the target
account.
5
Enter the administrator number from the 10-
Key Pad and touch [Enter].
NOTES
• The access code should be a 4-digit number.
4003P478EB
• To correct a number entry, press the Clear key
and then enter the new number.
• If you want to program an access code for
another account, repeat steps 3 through 5.
• If a new access code is programmed, the old
one is erased.
• If a new access code entered already exists for
another account, the entry is rejected. Enter a
different access code.
6
Touch [Enter].
4003P479EA
Useful Tip
The account number may be changed by
touching the corresponding No. key and using the
10-Key Pad. If the account number newly entered
4003P180CA
already exists, that entry is canceled.
1149O243AB
4003P560EA
Advertisement
Table of Contents
