Auxiliary Functions - Minolta Di200 User Manual

6. Auxiliary Functions

Auxiliary Functions
Panel Resetting
The Panel Reset key resets all control panel
settings to default settings, including the number
of copies and zoom ratio. The settings just made
would also be cleared.
Useful Tips
• The Panel Reset key enables you to cancel all
previous settings at the touch of the key.
• To avoid miscopy, be sure to press this key
before making any setting for your own copy
job.
Auto Copy Start
If you load originals into the document feeder or
place an original on the glass and press the Start
key while the machine is warming up after it has
been turned ON, the Auto Copy Start function
allows that copy process to started as soon as the
machine completes warm up.
Interrupt
The Interrupt function allows you to interrupt a
current job and run a different one. Pressing the
Interrupt key once stops the copy cycle and sets
the machine into the Interrupt mode.
Pressing the key again lets the machine leave the
Interrupt mode, returning to the previous settings.
NOTES
• To cancel an Interrupt cycle, press the Interrupt
key.
• The Panel Reset key does not cancel the
Interrupt mode.
Useful Tips
• Pressing the Interrupt key sets the machine into
the initial mode, except for the finishing
function which is Non-Sort.
• Custom Zoom and X/Y Zoom cannot be set in
the Interrupt mode. Cover, Page Insertion and
OHP Interleaving cannot be set in the Interrupt
mode, either.
Mode Check
By pressing the Mode Check key on the control
panel, you can either check or change or store the
current settings.
• When you touch [Exit] after having checked the
currently set funcions, the Basic screen
reappears.
• To change a certain funcion, touch the
corresponding key and then make the necessary
change.
• To register the current settings, touch the [Job
Mem Input] key. The Program register screen
will then appear. p.4-10
2-21
4012P186CC