Using The Original Glass - Minolta DI450 Operator's Manual

3-6
2. Placing the Original

Using the Original Glass

Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using an Electronic Document Handler,
• If you place your original directly on the Original Glass, make sure that it is placed in the direction
illustrated below.
• If you need to place your original in a direction different from these examples, set "Original Direction"
(the direction of the original) on the Touch Panel.
Sheet Originals
<Using plain paper or originals not suitable for the
Electronic Document Handler>
1
Raise the Original Cover.
2
Place the original face down on the Original
Glass.
3
Position the original in the left rear corner
with the marker on the scale.
Original Scale
4
Gently lower the Original Cover.
4002O124AC
p.3-38
Highly Transparent Originals
<Using transparencies and translucent paper for
the original>
1
Place the original in the same way as the
sheet originals.
2
Place a blank sheet of paper of the same size
over the original.
4002O123AC
3
Gently lower the Original Cover.
4002O133AB
p. 3-4
4002O125AC
Blank
Sheet of
Paper
4002O126AC