NOTE
Check that no portion of the staple sheet hangs
out of the cartridge. Break off any portion of the
sheet that hangs out of the cartridge.
6
Insert the new Staple Cartridge until a click
is heard.
7
Push the Staple Unit back in and close the
Front Door.
3. When the Message "Stapler is empty." Appears
8
Slide the Finisher back against the machine.
9
Touch [Staple] shown on the Touch Panel
and the machine automatically feeds a sheet
1134O076AA
of paper to test the stapling.
1155O070AA
10
Remove the sheet of paper to check that it
has been properly stapled.
* If no staples are evident, clear the staple
1155O071AA
misfed.
"Clearing the Staple Misfeed."
NOTES
• Reload the Staple Cartridge only after you are
prompted to do so by the message. Removing
the Staple Cartridge before then will result in
stapling trouble.
• After a new Staple Cartridge has been installed,
be sure to run a test-stapling sequence to
ensure that staples are properly driven into the
paper.
6-9
4002O188AC
4003P188CA
1155O644AC
p. 6-38