Table of Contents
Advertisement
Staple
Orig.
Hole Punch
Orig.
Folding
Orig.
Useful Tip
The machine has been factory-set to automatically switch between Sort and Non-Sort depending on the
number of originals and the number of copies to be made when the Electronic Document Handler is
used. It has also been set to automatically select Non-Sort in the initial mode. These default settings can
still be changed by using User's Choice.
Copy
<Only when a Finisher or Mailbin Finisher is
mounted>
• This function is effective when making multiple
copies from multiple originals. Copies are
sorted or grouped into complete sets of the
originals and then stapled.
• A copy set which has been sorted can later be
stapled together.
(Only when the Finisher FN-5 is mounted)
• Touch [Staple].
4002O058AA
Copy
<Only when the Finisher FN-5/ Finisher FN-105/
Mailbin Finisher is mounted>
• Holes are punched in the copy sets or stacks for
filing. It can be combined with Non-Sort, Sort,
Group or Staple.
• Touch [Hole Punch].
NOTES
<For United States and Canada Users>
• Finisher FN-5/Finisher FN-105
4002O285EA
The number of holes to be punched can be
selected from among two and three.
• Mailbin Finisher
The number of holes to be punched is three,
but "two" is optionally available.
<Except United States and Canada Users>
The number of holes to be punched is two.
<Only when the Finisher FN-5 is mounted>
Copy
• This function allows you to fold copies.
• Touch [Fold].
You have a choice of folding options, either
4002O060AA
Crease, Half-Fold, or Z-fold.
p.5-14
3-21
5. Selecting the Finishing
p.3-26
p.3-28
Advertisement
Table of Contents
