Selecting Mixed Orig. Detection And Other Functions; Mixed Orig. Detection And Other Functions - Minolta DI450 Operator's Manual

3-66

9. Selecting Mixed Orig. Detection and Other Functions

Mixed Orig. Detection and Other Functions

Pressing the Original key on the control panel shows a screen that allows you to set the Mixed Original
Detection and other document-related functions the machine offers.
• Touching either one of the two function keys highlights that particular key, which sets that function.
• Touching it a second time cancels the setting of that function.
Selecting Mixed Original Detection
Use the Mixed Original Detection function to
make copies automatically from originals of
assorted sizes loaded in the Electronic Document
Handler.
Orig.
Auto Paper
Auto Size
NOTES
• <When the Finisher FN-105/Finisher FN-106/
Mailbin Finisher is mounted>
The width of the originals loaded must be the
same if Mixed Orig. Detection, Auto Paper, and
Staple are combined together to make copies.
ex.: For originals consisting of 11 17L, Letter
C, and Letter L, copies can be made if
Letter L is aligned with Letter C.
• <When the Finisher FN-5 is mounted>
Copies cannot be made if Mixed Orig.
Detection, Auto Paper, and Staple are
combined together. It becomes, however,
possible to make copies when Z-Fold is further
combined with these three functions and if
originals are loaded so that all have the same
width.
1
Load the stack of originals so that the rear
edge of each original is pressed against the
rear Document Guide Plate. Then, slide the
front Document Guide Plate against the front
Copy
edges of the originals with the greatest width.
4002O296EB
2
Touch [Mixed Orig. Detection].
Useful Tip
User's Choice allows you to default to Mixed
Original Detection.
4002O147AD
4002O148AD
4003P117CA
p.5-13