3-26
5. Selecting the Finishing
Manual Staple
<Only when the Finisher FN-5 is mounted>
1
Open Staple Tray Cover [FN10].
2
Align the sheets of paper neatly.
3
Insert a neat stack of paper face down into
the Staple Tray.
NOTES
• Make sure of the stapling position and press the
paper stack against the end bracket.
• Up to 50 sheets of plain paper can be stapled.
4
Slide the Paper Guide Plate to the size of the
paper.
1155O033AA
NOTE
Make sure that the Paper Guide Plates are in
touch with the edge of the paper stack.
5
Close Staple Tray Cover [FN10].
1134O039AA
6
After you hear the sound of mechanism
stops, select the desired stapling type on the
Finisher Panel.
1155O036AB
1155O034AA
1155O035AA
1155O037AA