Selecting The Finishing Function - Minolta DI450 Operator's Manual

3-22
5. Selecting the Finishing

Selecting the Finishing Function

Sort/Group
1
Touch the desired finishing function key.
NOTES
• When either the Finisher FN-105, Finisher FN-
106, or Mailbin Finisher is mounted, copies are
fed out in a sawtooth manner in Sort or Group
mode. When the Finisher FN-5 is mounted, or
when neither a Finisher nor a Mailbin Finisher
is mounted, copies are fed out in a crisscross
manner in Sort or Group mode.
• Crisscross sorting is possible only when all of
the following conditions are met:
• Crisscross Mode of User's Choice is turned
"ON."
• The machine is loaded with paper of the same
size, but in two different directions.
• OHP, Card/Vellum, or a small size is not set if
the Multi Bypass Tray is used.
• Mixed Original Detection is turned OFF.
• None of the Staple, Hole Punch, Folding, Page
Insertion, and Cover functions are set.
Useful Tips
• If Crisscross is set to "ON" in User's Choice,
sorted copy sets will be stacked in a crisscross
manner, one set stacked lengthwise on top of
another set stacked crosswise. Otherwise, if
Crisscross is set to "OFF," the sorted copy sets
will be stacked together in the same direction.
• The default setting for Crisscross is "ON." This
can be changed to "OFF" in User's Choice.
p.5-14
Useful Tips
• Shift Sorting
The sorted copy sets are stacked in the same
direction, but in a sawtooth manner by shifting
the tray to the front or rear for each set.
4003P330EA
• Crisscross Sorting
The sorted copy sets are stacked in a crisscross
manner, one set stacked lengthwise on top of
another set stacked crosswise.
• Shift Grouping
The sorted copy stacks are stacked in the same
direction, but in a sawtooth manner by shifting
the tray to the front or rear for each stack.
p.3-11
• Crisscross Grouping
The sorted copy stacks are stacked in a
crisscross manner, one stack stacked lengthwise
on top of another stack stacked crosswise.
4002O061AB
4002O062AB
4002O063AB
4002O064AB