Minolta DI450 Operator's Manual page 82

[Margin] key for the original:
When you're going to make copies using Single-
Sided Double-Sided or Double-Sided
Sided, first check to see if your original has a file
margin in it. The machine can correct the margin
position to make good copies as long as you
instruct it properly.
Original with a File Margin
If your original has a file margin
1
Touch [Margin].
2
Select the desired margin position.
You have a choice of the following two
Margin Positions.
• Margin Position (Left)
Orig.
• Margin Position (Top)
Orig.
Single-
Original with no File Margin
1155O735AA
4003P054CA
Copy
1155O635AA
Copy
1155O636AA
6. Selecting the Original
3
Hold down [ ] or [ ] until the desired
margin width is reached.
Useful Tip
You can change the margin width in 1/16
increments within the range 0 to 3/4.
4
Touch [Enter].
Useful Tips
• If the margin position is set to Left and width to
0, the image on both the front and back sides of
the copy has the same orientation as that on the
original.
Orig.
• If the margin position is set to Top and width to
0, the image on the 2nd side of the copy is
inverted to that on the 1st side.
Orig.
If your original has no file margin
It's not necessary to correct the margin position
and width if your original has no file margin.
3-39
Copy Type
4003P355EA
Copy
4002O013AB
Copy
4002O048AB