Table of Contents
Advertisement
CHANGING THE FRONT AND REAR
DIRECTION INDICATOR BULBS
Carefully read p. 131 (BULBS).
◆
Position the vehicle on the stand, see p.
82 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Unscrew and remove the screw (1).
While removing the protection screen,
proceed carefully in order not to break
the cog.
134
use and maintenance RSV mille TUONO
◆
Remove the protection screen (2).
Upon reassembly, correctly position the
protection screen in its seat. Tighten
the screw (1) moderately and carefully,
to avoid damaging the protection
screen.
◆
Press the bulb (3) slightly and rotate it
anticlockwise.
◆
Extract the bulb (3) from its seat.
- RSV mille R TUONO
Insert the bulb in the bulb socket,
making the two bulb pins coincide with
the relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
If the bulb socket (4) goes out of its
seat, insert it correctly, making the bulb
socket taper opening coincide with the
screw seat.
Advertisement
Table of Contents
