PARKING LIGHT BULB
◆
Remove the front fairing, see p. 109
(REMOVING THE FRONT FAIRING).
To extract the bulb socket, do not pull
the electric wires.
◆
Grasp the parking light bulb socket (8),
pull it and remove it from its seat.
◆
Withdraw the bulb (2) and replace it with
one of the same type.
NOTE
Make sure that the bulb is
correctly inserted in the bulb socket.
9
10
LOW BEAM BULB
NOTE
Extract the connectors one by
one, in such a way as to avoid positioning
them wrongly upon reassembly.
I f i t i s n e c e s s a r y t o r e m o v e a l l t h e
connectors at the same time, mark them
and make sure that you position them
correctly upon reassembly.
◆
Remove the front fairing, see p. 109
(REMOVING THE FRONT FAIRING).
◆
Move the protection element (9) with
your hands.
To extract the bulb electric connector,
do not pull its wires.
◆
Grasp the bulb electric connector (10),
pull it and disconnect it from the bulb.
◆
Release the two ends of the check
spring (11) positioned on the bulb socket
(12).
A
11
12
◆
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket,
making the respective positioning seats (A)
coincide.
◆
Correctly install a new bulb of the same
type.
Upon reassembly:
NOTE
Put back the protection element
( 9 ) w i t h t h e c a b l e p a s s a g e f a c i n g
downwards.
use and maintenance RSV mille TUONO
A
133
- RSV mille R TUONO