Changing The Front And Rear Direction Indicator Bulbs - APRILIA RS 125 TUONO - 2003 Manual

RS 125 Tuono_Ing_book_my03.book Page 74 Tuesday, April 29, 2003 3:11 PM
HIGH BEAM BULBS
N Working on the rear right side of the front
part of the fairing, move the protection
element (6) with your hands.
N Withdraw the electric terminal (7).
N Release the check spring (8) positioned
at the rear of the bulb socket (9).
N Extract the bulb (10) from its seat.
Insert the bulb in the bulb sock-
et, making the relevant position-
ing seats coincide.
Correctly install a new bulb of the same
N
type.
74
use and maintenance RS 125 Tuono
LOW BEAM BULB
N Working on the rear left side of the front
part of the fairing, move the protection
element (11) with your hands.
N Withdraw the connector (12).
N Release the check spring (13) positioned
at the rear of the bulb socket (14).
N Extract the bulb (15) from its seat.
Insert the bulb in the bulb sock-
et, making the relevant position-
ing seats coincide.
Correctly install a new bulb of the same
N
type.
16
17
18 19
CHANGING THE FRONT AND REAR
DIRECTION INDICATOR BULBS
Carefully read page 73 (BULBS).
Before changing a bulb, check
the fuses, see page 69 (CHANG-
ING THE FUSES).
N Position the vehicle on the stand.
N Unscrew and remove the screw (16).
While removing the protection
screen, proceed carefully in or-
der not to break the cog.
N Remove the protection screen (17).