Table of Contents
Advertisement
MAIN INDEPENDENT CONTROLS
4
1
CONTROLS ON LEFT HANDLEBAR
NOTE
The electrical parts work only when the ignition switch
is in position " ".
1) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
46
use and maintenance RSV mille TUONO
5
3
2
)
)
- RSV mille R TUONO
3) DIMMER SWITCH (
When it is in position "
light and the low beam are always on.
When it is in position "
4) PASSING PUSH BUTTON (
(multifunction)
N O T E
F o r t h e s e t t i n g o f t h e f u n c t i o n s , s e e p . 4 0
(MULTIFUNCTION COMPUTER).
This push button makes it possible to use the passing button
in case of danger or emergency, or displays the various
preset functions on the right multifunction display:
– hour and minutes;
– coolant temperature (°F or °C);
– chronometer.
The passing is operated by pressing the push button,
independently of the position of the light switch (
NOTE
To disconnect the passing, release the push button.
5) COLD START LEVER ( )
The starter for the cold start of the engine is operated by
rotating the lever " " downwards.
To disconnect the starter, move the lever " " to its initial
position.
-
)
" the parking lights, the dashboard
", the high beam comes on.
)/LAP PUSH BUTTON
-
•
-
).
Advertisement
Table of Contents
