REMOVING THE BATTERY
To remove the battery it is necessary to
set to zero the digital clock and the red
line setting. To reset these functions,
s e e
p .
2 0
( M U L T I F U N C T I O N
COMPUTER).
Carefully read p. 123 (BATTERY).
◆
Make sure that the ignition switch is in
position " ".
◆
Remove the rider seat, see p. 106
(REMOVING THE RIDER SEAT).
◆
Unscrew and remove the screw (1) on
the negative terminal (–).
◆
Move the negative cable (2) on the side.
◆
Remove the red protection element (3).
124
use and maintenance RSV mille TUONO
◆
Unscrew and remove the screw (4) on
the positive terminal (+).
◆
Move the positive cable (5) on the side.
◆
Unscrew and remove the screw (6).
◆
Remove the bracket (7) that locks the
battery.
◆
Grasp the battery (8) firmly and remove it
from its compartment by lifting it.
Once it has been removed, the battery
must be stored in a safe place and kept
away from children.
◆
Position the battery on a flat surface, in a
cool and dry place.
- RSV mille R TUONO
◆
Put back the rider seat, see p. 106
(REMOVING THE RIDER SEAT).
NOTE
For the installation of the battery,
see p. 126 (INSTALLING THE BATTERY).