CHRONOMETER (RIGHT DISPLAY)
The chronometer makes it possible to
measure the time per lap with the vehicle
on a racetrack and to store the data, in
such a way as to be able to consult them
successively.
When the "CHRONOMETER" function has
been selected, it is not possible to recall
the following functions:
– maximum speed "V max";
– average speed "AVS";
– distance "trip 2".
◆
To operate the chronometer, press the
"LAP" push button (6) and, within seven
seconds, the push button
◆
To start timing, press the "LAP" push
button (6) and release it immediately.
◆
To store the time acquired, press the
"LAP" push button (6).
The "LAP" push button (6) is not enabled
for 10 seconds and the last time stored
(23) is shown on the display.
After which, the chronometer with the
current timing (24) is displayed, starting
from ten seconds.
◆
To display the first time stored (25),
press the push button
◆
To be able to see the stored times in
sequence, press the "LAP" push button
(6). The writings
are displayed.
◆
To start timing again, press the push
button
NOTE
It is possible to store max. 40
.
times, after which the "LAP" push button
(6) is not effective any longer.
◆
To set the memory to zero, press the
push button
button (6) at the same time for two
seconds.
.
L1
L2
L3
L4
,
,
,
, etc. (26)
.
and the "LAP" push
use and maintenance RSV mille TUONO
◆
To leave the chronometer function, press
the "LAP" push button (6) and the push
button
.
The coolant temperature (8) and the digital
clock (7) appear on the right display
(multifunction).
NOTE
When the engine is cold, the
writing "
" blinks.
DIAGNOSTICS
Whenever the ignition switch is turned to
EFI
position " ", the writing "
for about three seconds.
efi
If the writing "
" is displayed during
the normal operation of the engine, this
means that the electronic unit has
detected an anomaly. In many cases,
the engine keeps running with reduced
p e r f o r m a n c e l e v e l s ; i m m e d i a t e l y
contact an aprilia Official Dealer.
- RSV mille R TUONO
" is displayed
45