BATTERY
Carefully read p. 83 (MAINTENANCE).
Risk of fire.
K e e p f u e l a n d o t h e r f l a m m a b l e
substances away from the electrical
components.
Never invert the connection of the
battery cables.
Connect and disconnect the battery
with the ignition switch in position " ",
otherwise some components may be
damaged.
Connect first the positive cable (+) and
then the negative cable (–).
Disconnect following the reverse order.
NOTE
This vehicle is provided with a
maintenance-free battery and no servicing
is necessary, excepting occasional checks
and the recharge when required.
CHECKING AND CLEANING THE
TERMINALS
Carefully read p. 123 (BATTERY).
◆
Make sure that the ignition switch is in
position " ".
◆
Remove the rider seat, see p. 106
(REMOVING THE RIDER SEAT).
◆
Remove the red protection element (1).
◆
Make sure that the cable terminals (2)
and the battery terminals (3) are:
– in good conditions (and not corroded or
covered with deposits);
– covered with neutral grease or vaseline.
2
2
If necessary, proceed as follows:
◆
Remove
the
(REMOVING THE BATTERY).
◆
Brush the cable terminals (2) and the
battery terminals (3) with a wire brush, in
order to eliminate any trace of corrosion.
◆
Install
the
(INSTALLING THE BATTERY).
use and maintenance RSV mille TUONO
3
3
battery,
see
p.
124
battery,
see
p.
126
123
- RSV mille R TUONO