◆
Withdraw the cable (9) completely.
◆
Put back the fuel tank, see p. 106
(LIFTING THE FUEL TANK).
◆
Put back the left side body panel, see p.
107 (REMOVING THE SIDE BODY
PANELS).
NOTE
Support the stand, in order to
prevent it from accidentally falling down.
Screws driving torque (11): 28.930 Ftlb
(40 Nm) .
◆
Unscrew and remove the screws (11)
and take the washers (12).
◆
Remove the stand (1) complete with:
– springs (2);
– support (3);
– safety switch (4).
NOTE
Store the following components
together: complete stand, screws (11) and
washers (12), in order to be able to install
them correctly when the vehicle must be
used on roads.
◆
Put back the lower fairing (and the two
side fairings), see p.107 (REMOVING
THE LOWER FAIRING).
use and maintenance RSV mille TUONO
111
- RSV mille R TUONO